Lexmark · Monochrome Multifunction

Lexmark MX910 Series

Floor-standing A3/SRA3/12x18 mono laser MFP family for departments of 50-150 — 45/55/65 ppm (MX910/911/912), 100-sheet single-pass duplex DADF, 1,150-3,650-sheet standard capacity (6,650 max), 10-inch touchscreen, 300,000-page duty cycle.

4.7 · 3 verified reviews · Read reviews
Print speed
55 ppm color
Paper capacity
6650 sheets
Duplex
Auto Duplex Print & Scan (DADF)
Connectivity
USB · Ethernet
Get a quote Buy supplies Call (706) 561-0075
Free delivery 24-hr quote turnaround Authorized Lexmark reseller Lease or buy outright
In stock
Lexmark MX910
Authorized Lexmark reseller Free shipping to 50 states 1-year manufacturer warranty Install guidance by phone 30-day return policy
Is this the right printer for you?

Who the Lexmark MX910 Series is actually for

Most printer pages just tell you what a printer does. Here's the honest version: when this machine is the right choice, when it's fine, and when you should look at something else. We sell a lot of these for a reason, but the reason is not "every office."

Best fit

Pick this if...

  • You run a department or central copy room serving 50-150 people that needs A3/SRA3 (up to 12x18) mono output and high single-pass duplex scan throughput.
  • You print 15,000-50,000 pages a month — Lexmark's recommended volume is 15,000-50,000.
  • You scan two-sided originals constantly — 100-sheet single-pass DADF runs at 140 sides per minute duplex.
  • You need full finishing — multi-position stapling, offset stacking, hole-punching, booklet, saddle stitch, tri-fold all available.
  • You need 65-ppm speed for high-traffic environments (MX912de) — MX910de is 45 ppm, MX911de is 55 ppm.
Works fine

You'll be happy if...

  • You print up to 100,000 pages a month — duty cycle is 300,000 (MX912); the chassis is built for it.
  • You're upgrading from a legacy XM9145 — same chassis family, slightly different SKUs.
  • You only need 45-55 ppm — the MX910de or MX911de saves money on the same chassis.
  • You want Wi-Fi — optional 802.11b/g/n adapter; not standard.
Look elsewhere

Skip this if...

  • You need color — this is mono only. Get the CX920, CX930, or CX940 for A3 color.
  • You print under 15,000 pages a month — overbuilt; the MX721/MX722 (A4) or MX931 (A3) saves money.
  • You don't have floor + service space — MX912 is 45 inches tall, 27 inches deep, 264 lb; needs floor footprint plus operator clearance.
  • You're starting fresh — MX910 series is the legacy generation; MX931/MX932 is the modern A3 mono replacement with smaller chassis.
  • You need a 7-inch tablet UI — the MX910 ships with a 10-inch touchscreen, sized for kiosk install.
Full specifications

Every spec, no guessing

The Lexmark MX910 series (MX910de 45 ppm, MX911de 55 ppm, MX912de 65 ppm) is the legacy floor-standing A3/SRA3/12x18 mono laser MFP for departments and central copy rooms serving 50-150 people that need in-house oversized mono and full finishing. The MX912de prints and copies at 65 ppm, scans through a 100-sheet single-pass DADF at 140 sides per minute duplex, and is rated for a 300,000-page monthly duty cycle (Lexmark recommends 15,000-50,000/month). Standard input ranges from 1,150 sheets (MX910) to 3,650 sheets (MX912), expandable to 6,650 with optional HCI. The 10-inch e-Task color touchscreen handles kiosk workflows, scan-to-LDSS/SharePoint, held jobs, and full Workpath app deployments. Standard connectivity is Gigabit Ethernet and USB 2.0; Wi-Fi 802.11b/g/n is optional. Finishing options include staple, hole-punch, booklet, saddle stitch, and tri-fold. The thing buyers regret: keeping the legacy MX910 chassis when the MX931/MX932 platform replaced it with a smaller footprint and same A3 mono capability. For new installs needing A3 mono at 65 ppm with the legacy chassis and finishing options already in your environment, the MX912 is still the right call. New deployments should compare MX932 first.
Get a quote on this model Compare other printers
Print
Print technology Multifunction
Print speed (mono) Up to 0 pages per minute
Print speed (color) Up to 55 pages per minute
Duplex printing Auto Duplex Print & Scan (DADF)
First page out < 5.6 seconds
Copy & Scan
Capability Monochrome Multifunction
Copy speed Up to 45 ppm copies per minute
Duplex copy / scan Auto Duplex Print & Scan (DADF)
Scanner type Single-pass duplex flatbed with ADF
Scan destinations
Paper
Paper capacity 6650 sheets
Paper size A5 · A4/Letter · Legal · A3/Tabloid
Automatic document feeder 100 sheets pages
Recommended monthly volume 15000 pages
Max monthly duty cycle 200,000 pages/month
Connectivity
Wired Gigabit Ethernet (10/100/1000)
USB USB for charging, data transfer, and OTG support
Display 10 inches
Physical & power
Form factor Workgroup
Usage class Small Office
Manufacturer Lexmark
Model MX910
How you can buy this printer

Buy it, lease it, or just reorder supplies

Three ways to get this printer, each priced to match how you actually use it. Most small offices lease because toner and maintenance are bundled. If you know what you need, buy outright. If you already own one, just reorder supplies.

Buy outright
One-time payment · yours to keep
Custom quote
Free delivery · 1-yr warranty
  • Machine is yours the day it arrives
  • 4,500-page starter toner included
  • 1-year Lexmark manufacturer warranty
  • Install help by phone or remote session
  • Order your own toner when the starter runs out
Request purchase quote →
Most small offices
Lease & bundle
36- or 60-month term · toner included
Custom lease quote
Flexible terms · tailored to your volume
  • Printer + unlimited toner bundled
  • Maintenance and parts included
  • Upgrade to a bigger machine anytime
  • Typical lease payment is tax-deductible
  • One predictable monthly bill instead of surprise toner orders
Request lease quote →
Supplies only
Already own one? Just reorder.
Request pricing
Genuine Brother TN830 / TN830XL
  • Genuine Brother TN830 toner (standard yield, ~1,200 pages)
  • Genuine Brother TN830XL toner (high yield, ~4,500 pages)
  • Genuine Brother DR810 drum unit when it's time
  • Free shipping on qualifying orders
  • Auto-reorder option so you never run out mid-job
Order supplies →

Final lease rate depends on term length, credit profile, and bundled supplies. Outright purchase and supplies pricing varies with bundled warranty, install packages, and order volume. Request a quote for exact pricing.

Included with every order

What ships with the Lexmark MX910 Series

The printer itself

Lexmark MX910 Series in original Lexmark packaging. Workgroup form factor, roughly 90.9 x 61.5 x 69.7 cm

Starter toner

Includes a high-capacity starter supply, giving you about 3 to 6 months of use before you have to think about your next order.

Setup documentation

Lexmark quick-start card, power cord, USB cable (use Wi-Fi or Ethernet for multi-user), and a link to driver downloads.

Setup call (if you want it)

Book a 20-minute setup call with our team. We'll walk through network config, driver install, and first print. No extra cost, no sales pitch.

Supplies & consumables

Toner, yields, and what to actually reorder

The #1 question we get on this printer is "which toner do I buy?" Short answer: you have two cartridge options and a drum. Standard yield TN830 covers roughly 1,200 pages. High yield TN830XL covers roughly 4,500 pages and is the better value for most offices. Pick XL unless you print very little.

The drum unit (DR810) is separate and usually lasts 15,000 to 30,000 pages before it needs replacing. At a typical small office volume, expect to change it once every 2 to 4 years.

If you lease this printer through us, toner and drum are included. You never pay for supplies separately. That's usually the better deal once you add up real costs over 3 years.

TN830

Standard-yield toner

About 1,200 pages · fits all L2700 / L2750 / L2759 series

Quote
each
TN830XL

High-yield toner BEST VALUE

About 4,500 pages · recommended for most offices

Quote
each
DR810

Drum unit

15,000–30,000 pages · replace every 2–4 years · separate from toner

Quote
each
Request bulk supplies pricing →
4.7
★★★★★
Based on 3 verified customer reviews

Verified means the customer bought this exact model from us. We don't publish paid or incentivized reviews.

What customers actually say

The 5-star consensus: "it just works"

Small sample size, high signal. The 3 verified reviewers picked this model to replace older inkjets or aging Lexmark machines. Common threads in the feedback:

  • ★ "We've had the MX910 in our office for about two years now and it handles our high-volume printing without complaints. The automatic duplex is solid and the finishing options save us time on collating. Network setup was straightforward."
  • ★ "Good workhorse machine for a small accounting firm. Speed is decent and the scan-to-email feature works well. My only gripe is the toner cartridges are pricey and the touchscreen can be a bit slow to respond sometimes."
  • ★ "Replaced an older Lexmark with this one and the build quality feels solid. Print quality is consistent across different paper types and the meter readings actually match our usage. Been reliable for the past year."

Five reviews is a small sample. Want to see hundreds of reviews across our whole catalog? We have a 5.0 average on Google across 1,240+ reviews and an A+ BBB rating. Linked below.

Better Business Bureau
A+ BBB rated
Accredited business
★★★★★
5.0 on Google
1,240+ reviews
G2 verified vendor
G2 verified
Vendor profile
Free quote · no obligation

Get a quote on the Lexmark MX910 Series

Tell us how you want to pay (outright, lease, or supplies only) and what volume you run. You'll get a line-item quote back within one business day, from a specialist who actually works on these machines, not a general sales rep.

  • Real pricing, no runaround. Upfront monthly lease rate or outright price, plus shipping and any install add-ons itemized.
  • One business day turnaround. Quotes land in your inbox within 24 hours. Often faster.
  • No credit pull until you say yes. We don't ping your credit to give you a quote. Only if you sign.
  • Volume & bundled supplies. Tell us your monthly print volume and we'll price toner bundling so you don't get surprised.
FAQ

Lexmark MX910 Series, common questions

The questions we get asked most often on this model. If yours isn't here, call (706) 561-0075 and get an answer in about 30 seconds.

Yes, the Lexmark MX910 Series ships with a starter toner cartridge that yields approximately 21,000 pages. The replacement high-yield toner cartridge (Lexmark 64G0H00) yields up to 32,500 pages. When you lease through us with toner included, you never pay for toner separately.
The Lexmark MX910 Series is a monochrome laser MFP designed for high-volume black-and-white printing at speeds up to 65 ppm, with a monthly duty cycle of 300,000 pages. In contrast, the Lexmark CS960 Series is a color laser printer that prints at 55 ppm in both black and color, with a maximum duty cycle of 270,000 pages. The MX910 is ideal for departments needing high-speed monochrome output, while the CS960 is better suited for workgroups requiring color printing. For small offices, the MX910 offers robust monochrome performance, but if color is needed, the CS960 is a better fit.
The Lexmark MX910 Series is designed for departments or central copy rooms serving 50-150 people, with a recommended monthly volume of 15,000-50,000 pages. Its high-speed monochrome printing (up to 65 ppm) and extensive finishing options make it suitable for small businesses with high-volume printing needs. However, if your business requires color printing or has lower volume needs, consider stepping up to a commercial option like the Lexmark CS960 Series.
No, the Lexmark MX910 Series is a monochrome-only printer. If you need color printing, consider alternatives like the Lexmark CS960 Series, Lexmark CS632dwe, or other color laser printers in the Lexmark lineup.
Request a quote through the form on this page or call us at (706) 561-0075. A printer specialist responds within one business day with a detailed, itemized quote based on your location, monthly volume, whether you want to buy outright or lease, and any bundled supplies or service. Quotes are free and no obligation. We do not pull credit to issue a quote.
Lexmark includes a 1-year limited manufacturer warranty on the Lexmark MX910 Series when purchased new from an authorized reseller. Automated Business Machines is an authorized Lexmark reseller. Extended warranty and full-service maintenance plans are available through our managed print services bundle, which covers parts, labor, and on-site service for the life of the agreement.
Yes. Free delivery is included on every Lexmark MX910 Series order shipped within the continental United States. Most orders ship within 1 to 2 business days and arrive within 2 to 5 business days. Install guidance is available by phone or remote session at no extra cost.

Ready to put this printer to work?

Request a free, no-obligation quote on the Lexmark MX910 Series. Lease, buy outright, or just order supplies. Quote in your inbox within one business day. Or call and talk to a specialist right now.

Get my free quote Or call (706) 561-0075